Unique design that promotes the water supply - Category 5
Roswater Tube A1 – First priority for any water supply
Description
Tube A1 consists of a pipe with dual walls featuring air between for frost protection. The pipe has an inner diameter of 2400 mm. It has a base wall and a separation chamber in the middle of the pipe. The separation chamber is used as a reservoir to the SP-pump installed horizontally in the base of this reservoir. The pump is connected with a pipe that pumps the water underneath the house floor into a joint at the main entrance.
In front of the partition of the reservoir there is a small technical room featuring an electrical board with a flow counter that registers the consumption.
On the outside there is a door to the technical room where a pay machine is situated to register the customer, and by acceptance, the customer can start filling a tanker etc.
Around the pipe there is mounted a 3 mm. steel cape made of corten steel which makes a rusty look.
At the entrance there is a coloured light featuring our company logo. This light markets the Water Supply and shows the customer that here is a ”Water Shop” which the Water Supply has approved. Roswater has established a ”mounthing hatch” underneith Tube A1, which is used for transferring land lines and electrical cables.
Roswater always mounts and installs Tube A1 in association with professional craftmen. The Water Supply always comes with an A-Z solution and therefore the customer only needs to appoint the location for installment.
Benefits of Tube A1
- The first all-in-one water shop with a unique design.
- Simple technique that minimizes maintenance and insures a good eceonomy.
- Design that markets the water supply in a professional manner.
- Easy to service with clear access to electrical components and hubs.
- Extremely easy to transport with (lifting eyes?) that are counter sunk so they can be covered with soil or concrete.
- Corten steel makes a rusty look and makes it blend into nature.
- A mounting hatch underneath the Tube for easy connection of water and electricity.
- Sturdy design in 3 mm. of steel.
- The payment system automatically invoices directly to the book holding and the technical room alarms the SRO-system of the water supply.
Unique design, sturdy and service-friendly
Case 1 about Tube A1
Purchase: The Water Supply have discovered that water is being ”loaned” from multiple places like fire hydrants in the supply area. The Water Supply manager decided that this must end so he bought a Tube A1 for mounting at the driveway of the Water Supply-area allowing suction vehicles, fire trucks etc. to easily reach the Tube A1. The Water Supply Manager also decided that customers who wanted to use the new Tube A1 should be excempt from paying water treatment taxes which thereby gave the trucker a motivation to use Tube A1. The Water Supply have now insured that the suction vehicle never pumps waste water into the fire hydrants and further on to the consumers. It is now considered by the Fire Department of the city to purchase the Tube A1, as it has become a major success in the Water Supply.
Case 2 about Tube A1
Rental: The Water Supply in the area are hired to deliver water to a festival and decided to purchase a Tube A1 for rental purposes. The festival were to appoint a suitable destination for installment and the Water Supply to manage the project in association with Roswater who were responsible for the A-Z solution with electricians, craftmen, the Water Supply etc. The festival did the inspection during the rental period and after the festival the Tube A1 was transported back to the iron workshop at the Water Supply and serviced and prepared before next customer would rent it.
Lease contract: The Water Supply in association with Roswater will draw a detailed lease contract with the applicapable terms and conditions. After the end of the lease period the Tube A1 returns to the iron workshop of the Water Supply for reviewal, control and disinfection before next lease takes place.
